Description
Topping D10 Balanced Desktop USB DAC
View User Manual >>
Features:
- ES9038Q2M Chip DAC, with 125dB Dynamic Range at 1kHz.
- D10 Balanced is compatible with 16- 32bit/44.1 -384kHz and DSD64-DSD256 Native
- Supports professional ASIO applications, use the customized driver from Thesycon.
- Wide range of compatibility: Windows(above Win10), MAC, and Linux can all be plug and play.
- Automatic power on/off, synchronously power on/off with PC.
- With TRS/XLR Balanced output for active speakers, power/headphone amp.
- USB interface application, connect D10 Balanced’s coaxial /optical output to serve as a USB bridge.
Compact size ultra performance
Balanced USB DAC.
Compatible with DSD256 and PCM384
D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native.
Automatic power on/off
D10 Balanced will synchronously power on/off with PC.
Plug and Play under multiple OS
D10 Balanced has a wide range of compatibility: Windows (above Win10), MAC, and Linux can all be plug and play. Only for ASIO applications under Windows need to install the driver and set it up. (Android and IOS not compatible due to insufficient OTG current).
Professional applications are also competent
D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Linux, it can be set in the music playback software; when using ASIO with Windows, you can use the customized driver from Thesycon.
Audio format and sampling rate indicator
D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night. DSD playback only displays the sampling rate in ASIO mode.
Connect to active speakers
Connect the output of D10 Balanced to your active speakers, then send better sound directly into the speakers in a more professional way.
Connect to power/headphone amplifier
You can connect D10 Balanced to your amplifier/headphone amplifier’s input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files.
USB interface application
If you already have a better DAC, you can connect D10 Balanced’s coaxial / optical output to your DAC, then D10 Balanced serve as a USB bridge. D10 Balanced outputs no higher than PCM 24bit 192kHz or DSD64 when served as USB bridge.
Specifications
| Measured | 10.3cm x 14.6cm x 3.7cm |
| Weight | 340g |
| Power input | DC5V / 0.5A (USB power supply) |
| Signal input | USB |
| Line Out output | 6.35mm TRS (Note: No Single-ended output) |
| Digital output | OPT/COAX |
| Display | LED |
| USB IN | 44.1kHz – 384kHz/16Bit – 32Bit |
| DSD64 – DSD128 (Dop) | |
| DSD64 – DSD256 (Native) | |
| OPT/COAX OUT | 44.1kHz – 192kHz/16Bit – 24Bit |
| DSD64 (Dop) | |
D10 BALANCED DECODING PARAMETERS (USB IN@96KHZ) |
|
| THD+N@1kHz A-wt | <0.00012% |
| THD | <0.00015% @20-20kHz |
| SNR@1kHz A-wt | 125 dB |
| Dynamic Range@1kHz A-wt | 125 dB |
| Frequency Response | 20Hz – 20kHz (±0.2 dB) |
| Output Level | 4.2Vrms @0dBFS |
| Noise | <2.4uVrms |
| Channel Crosstalk@1kHz | -141dB |
| Channel Balance | 0.3dB |
| Output Impedance | 88Ω |
| Output DC | Differential – <1mV |
| Common – <70mV | |
