Description
IsoAcoustics Orea INDIGO Series Audio Isolation Feet
The IsoAcoustics Orea INDIGO Series Audio Isolation Feet are made of machined stainless steel and feature a low-profile design to minimize any increase in height.
Each OREA model is designed with a different weight capacity. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity.
The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.
View IsoAcoustic Products >>
Features
Greater sound clarity
The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component, while the lower flange adheres to the supporting surface.
All the energy is managed within the core of the OREA’s, which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic, three-dimensional sound.
Works with or without feet
The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively, you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.
Weight Capacity
The OREA’s are designed to be used in multiples to match the weight of the component or speaker. The total weight capacity is calculated as follows:
Total Weight Capacity = [Weight cap. per isolator] x [Qty of isolation feet]
|
Quantity of isolators |
Graphite 4lbs (1.8kg) / unit | Bronze 8lbs (3.6kg) / unit | Indigo 16lbs (7.2kg) / unit | Bordeaux 32lbs (14.5kg) / unit |
|
3 |
12 lbs. (5.4 kg) | 24 lbs. (10.8 kg) | 48 lbs. (21.6 kg) | 96 lbs. (43.5 kg) |
|
4 |
16lbs (7.2 kg) | 32lbs (14.4 kg) | 64lbs (28.8 kg) | 128lbs (58 kg) |
| 5 | 20lbs (9 kg) | 40lbs (18 kg) | 80lbs (36 kg) |
160lbs (72.5 kg) |
| 6 | 24lbs (10.8 kg) | 48lbs (21.6 kg) | 96lbs (43.2 kg) |
192lbs (87 kg) |
It is common to use 3 or 4 OREA audio component isolation feet for each component or speaker, but keep in mind that it is most important to stay within the weight capacity of the OREA isolator.
The weight distribution of the component can also be taken into account. If for example the component is heaviest at the back, then it is common to use 3 isolation feet with 2 positioned at the back corners and 1 positioned front/center.
FAQ’s
Which components benefit the most from isolation?
All audio equipment will benefit from isolation. The biggest gains can be achieved by isolating speakers and subwoofers. Isolating turntables, tube amplifiers, and CD players are good places to start because they are particularly sensitive to vibration. Isolating Preamp tubes is important as issues will be amplified later in the chain.
Does the OREA work with speakers?
Yes, the OREA series can be used with speakers.
Can the OREA’s be positioned underneath the existing feet?
Whenever possible, we recommend positioning the OREA’s directly underneath the chassis or cabinet of the component or speaker.
If the existing feet cannot be avoided, then the OREA’s can be positioned underneath the existing feet. The challenge with positioning the OREA’s underneath the existing feet is that often the weight is concentrated on the center of the OREA. It is best if the weight is applied evenly to the top of the OREA isolator.
Is the suction cup connection required for the OREA’s to work properly?
The suction cup effect is not required for a strong connection. The OREA’s will have a suction cup connection to smoother surfaces. For textured surfaces, the OREA’s will have a strong friction grip.
What are the benefits of isolating equipment?
Equipment can be sensitive to vibrations and forces. Removing parasitic vibrations releases new levels of sound clarity and openness when used with amplifiers, DAC’s, CD Players, turntables, and more.
Specifications
- Dimensions (WxDxH) 2.3″x1.3″ (58x33mm)
- Tilt No
- Weight Capacity 16lbs (7.2kg) per unit
- Quantity 1 Unit (Single)
