Home Theatre Speaker Placement
Estimated reading time: 6 minutes
Lets talk home theatre speaker placement. After our customer story a few weeks ago, we received several questions from you on what makes a good home theatre set-up. We want to give you some general outlines that we believe works very well.
We should point out that this is only a start in what we would consider a series of blogs, as there is so much to be said on this topic, it is impossible to cover it all in a single blog. But let’s begin at the beginning….
What kind of speakers – Home Theatre Speaker Placement
The obvious first question is what kind of speakers would you want to put in a good home theatre? At the very minimum you need a 5.1 set-up for a good discrete surround sound system. On a very basic level, this means 5 speakers and a subwoofer: the left and right front channels for the stereo as well as the main left and right front effect, the very important center channel for the main soundtrack and dialogue and 2 side surround speakers for surround effects. You can extend that to a 7.1 system (add left and right surround back channels) or even Dolby Atmos, which we covered in a previous blog.
What speaker placement is optimal – Home Theatre Speaker Placement?
This brings us to the next question: what speaker placement is optimal? In this case we will assume a nice rectangular home theatre, which we realize is kind of an ideal situation.
Setting the distance between the front left and right loudspeakers is a trade-off between a wide soundstage and a strong center image. The further apart the loudspeakers are, the wider the soundstage will be. As the loudspeakers are moved further apart, however, the center image weakens, and can even disappear. If the loudspeakers are too close together, soundstage width is constricted.
The ideal speaker separation will produce a strong center image and a wide soundstage. There will likely be a position where the center image snaps into focus, appearing as a stable, pinpoint spot exactly between the loudspeakers.
There are a few ways to determine the best spot to place your front left and right speakers. The more elaborate but very precise way if you get it right is use a musical selection with a singer and sparse accompaniment for setting loudspeaker spacing and ensuring a strong center image. With the loudspeakers fairly close together, listen for a tightly focused image exactly between the two loudspeakers. Move the loudspeakers a little farther apart and listen again. Repeat this move-listen procedure until you start to hear the central image become larger, more diffuse, and less focused, indicating that you’ve gone slightly beyond the maximum distance your loudspeakers should be from each other for a given listening position.
If you don’t want to spend the time trying to find the right position of your front speakers, there is a very simple but effective rule of thumb: Dolby recommends an equilateral triangular placement for the front left and right speakers. This means the speakers are placed equally away from the listening position.
Both these processes are good if you have a single seat in the home theatre. Most often there are more seats and you really want to provide a great listening experience for the entire audience. The solution is to choose very good quality front left and right speakers with very uniform dispersion. This means that the sound is very consistent and you need very little toe-in for speakers like this (Toe-in is pointing the loudspeakers inward toward the listener rather than facing them straight ahead), guaranteeing that every seat in the home theatre is a good seat.
If you use bookshelf speakers, you want to put them on speaker stands so the tweeters sit at ear level when sitting down.
The center channel needs to be placed in the center of the screen, at ear height.
Some people like to place their front speakers behind the screen. If that is your choice, make sure you place them as close as possible to the screen so you have as little diffraction as possible. It is good to be aware however that there will always be some loss of high frequency detail, but it definitely pays to opt for the best possible screen you can afford to avoid this. These days there are screens on the market with minimal distortion.
When choosing front and center speakers you probably want to opt for the same brand for these 3 speakers so they provide very similar acoustical properties and tonal characteristics for seamless transition in panning and a much more natural blend.
Surround Speakers – Home Theatre Speaker Placement
Surround speakers are placed very differently in the room so while it is nice to have the same brand, it is not as crucial as with the front speakers. That said, you do want to make sure that the surround speakers provide very similar dynamic capabilities. Remember, your home theatre is only as good as it’s weakest link.
Unlike the three fronts, the surround speakers are used to create a cloud of non-localized sound that envelops the viewer. Side speakers are best placed beside or a few feet behind the main seating area and a few feet above ear level so the surround sound is not too easy to localize.
If you prefer a diffuse sound field, bi-pole (in phase)/di-pole (out of phase) surround speakers are the way to go. If your choice is to have more localized information, we recommend monopoles. With more and more people choosing to also have rear channels, monopoles tend to be the more popular option these days. It would be interesting to dedicate an entire blog on this one day.
Rear surround channels in a 7.1 set-up are placed again a few feet above ear height and slightly closer together than the front speakers.
We will leave our tips on subwoofer placement for a future blog as this one is already becoming too extensive and frankly, subwoofer placement is kind of an art on it’s own. For those of you who are really interested, we had a blog on this several years ago, that is still available in our blog archive.
While it is important to start at the basics, we are also hoping to dedicate a blog in the future on how to deal with not so ideal room lay-out and other complications. Because let’s face it, not everybody has the luxury of having a state of the art home theatre set-up.
In the meantime, give us a ring or send us an email if you need help with your special set-up requests. We love to work with you towards the best possible solution.
The Rapallo Team
- Projector Lamp Longevity
Question: Do you have any idea why the colors of an InFocus projector have turned green-blue (or rather lost red) after only 250 hours? Is this an indication of lamp aging? - What is HDBaseT?HDBaseT™ is a technology that delivers high-definition video, audio, Ethernet networking, control signals, and power over a single Category 5E or Category 6 computer networking cable. The technology is meant to be used with consumer electronics and home theater equipment, and has a few benefits that are not offered by other types of connections. The initial version of the specification was announced in June 2010, and uses High-Definition Multimedia Interface (HDMI) signals over a network cable.
- Subwoofers: The Guts and the GlorySubwoofer design has undergone a revolution. No, the physics of woofers, amplifiers, and enclosures haven’t changed. But new technologies have made it possible to push the bass-ic laws of nature to their limits, such that the best of today’s inexpensive subwoofers can outperform many of the top models from 15 or 20 years ago.
- The Art of Subwoofer Placement
What’s the best location for my subwoofer? Like many things in life, subwoofer placement often involves compromise, and is typically driven by competing variables like décor and visual impact considerations, available floor space, and of course optimal sound quality. - The Cabinet & the SubwooferI’m in the interesting position of telling you how to do something with a subwoofer that you shouldn’t do. No, it’s not illegal. But in the ears of those for whom sound quality is more important than ergonomics, décor, and/or domestic tranquility, it’s definitely heretical.
- Do projection screens really differ?One person wrote recently that he was looking at three fixed-frame projector screens. All of them white, all of them the same size. One was $1800, one was $1200, and one was $600. Is there really any difference between them, or is it all just marketing?
- HDMI Audio Return Channel (ARC)What is ARC (Audio Return Channel)?Audio return channel, or ARC, is a technology which allows sound to travel back to your ARC enabled AV receiver or sound bar, from your television.How does it work?
- HDMI Matrix Switchers
Home automation and sound distribution is no longer in the realms of science fiction – nowadays it is possible to have complete control of lighting, media systems, home audio, heating/air con, security systems, all nicely integrated into an easy to control software available at your fingertips anywhere throughout the home. - HDMI over Cat 5/6 Extender’s
When wanting to send an HDMI signal over greater distances within your home there are three common options to go for: direct HDMI cable, wireless HDMI and HDMI over Cat 5/6 extenders.The best solution so far in my opinion would be using a quality HDBaseT or similar single cat extender for a number of reasons, let’s take a brief look at the pros and cons of all three options: