Home / Products / Rapallo / Audio Systems / HiFi Components / DAC / Audioengine D2R 24-Bit Add-on Wireless DAC Receiver
Audioengine D2 24-Bit Add-on Wireless DAC Receiver
Audioengine D2 24-Bit Add-on Wireless DAC Receiver
Audioengine D2 24-Bit Add-on Wireless DAC Receiver

Audioengine D2R 24-Bit Add-on Wireless DAC Receiver

$499.00 inc GST

D2R Add-on Receiver for D2

FREE SHIPPING

Advice from a specialist?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: D2R Categories: , , , , Brand:

Description

The D2R Add-on Receiver is an expansion kit for your D2 24-bit Wireless DAC. You can add up to 2 D2R add-on Receivers for a total of 3 zones.

It connects wirelessly to your existing D2 setup, and can output 24bit/96KHz digital or analog audio to your high end system or powered speakers.

Quality, Everywhere

The D2R Add-on Receiver is an expansion kit for your D2 24-bit Wireless DAC. You can add up to 2 D2R add-on Receivers for a total of 3 zones. It connects wirelessly to your existing D2 setup, and can output 24bit/96KHz digital or analog audio to your high end system or powered speakers. Add sound to an additional room, or even make your Audioengine S8 Powered Subwoofer wireless.

Additional information

Weight 5 kg
Dimensions 25 × 35 × 25 cm
Specifications

Outputs
RCA Stereo/Optical (SPDIF)
D/A converter
PCM1792A
Optical receiver
AK4117
Full-scale output
2.0V RMS
Output impedance
100 ohms
Power source
Included external supply
SNR
(DC to 20 kHz) >115dB
THD+N
(1kHz FS 96kS/s) <0.0015%
Crosstalk
<-85dB
Frequency response
10Hz-30KHz (+/- 0.5dB)
Wireless range (typical)
>100ft
Latency
<20ms
Product dimensions
4.75×5.5×1"
Shipping weight
4lbs (2.0kg)
Shipping box dimensions
15x9x5"
Environmental
Operating Temperature: 32 to 95 degrees F Non-operating Temp: -4 to 113 degrees F Relative Humidity: 5% to 95% non-condensing
Included accessories
RCA cable, 6.5ft Power adapter with detachable AC cord Microfiber bag Setup Guide
D2 DAC
The D2 Receiver utilizes the PCM1792 DAC, widely know for it's low noise and high fidelity. Due to the PCM1792's high signal-to-noise specs and the added benefit of triple redundancy power source conversion and filtering, the D2 presents impressive low noise and low distortion characteristics.

Related products