Chord Electronics CPA 3000 Seven Input Signature Preamplifier

$14,995.00 inc GST


The CPA 3000 Seven Input Signature Preamplifiershares many of the features found in the entry-level CPA 2500, but also draws on technologies found in our flagship Reference range preamps.

Compared to its CPA 2500 sibling, the CPA 3000 Seven Input Signature Preamplifier introduces four balanced inputs with three unbalanced RCA inputs and, on the output side, there are one pair of balanced XLR outputs and a single pair of unbalanced RCA outputs.

Advice from a specialist?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

Description

View User Manual >>

 

The CPA 3000 Seven Input Signature Preamplifieralso retains the record output facility shared with the CPA 2500: a single tape loop is available for playback and also to record from any of the connected sources. The CPA 3000 also benefits from features such as our proprietary high-frequency switch-mode power supply and ultra-low-noise circuitry, to give the very best noise floor performance.

As with all of our preamps, front panel controls allow for easy input and output selection and a remote control offers further flexibility. The fascia features a large easy-to-read vacuum fluorescent display and on the CPA 3000 Seven Input Signature Preamplifier, signal-detection indicators have been replaced with highly accurate VU meters giving both clear signal detection and accurate input level.

Further features include a precision motorised Alps potentiometer for the volume control, fully balanced A/V bypass circuitry for the direct connection to A/V processors from stereo mode and 12V remote triggering outputs at the rear of the unit, to activate power amplifiers or A/V processors on power-up.

Inputs & Outputs: 7 Stereo Inputs and 3 Stereo Outputs

  • 3x Stereo Unbalanced RCA Inputs – Line In 5, Line In 6, and Tape 1
  • 4x Stereo Balanced XLR Inputs – Line In 1, Line In 2, Line In 3, and Line In 4
  • 1x Stereo Balanced XLR Output
  • 2x Stereo Unbalanced RCA Output
  • 1x Stereo Balanced XLR AV Bypass Inputs

 

FEATURES

  • HF Switch Mode Power Supply
  • Blue Velvet ALPS Potentiometer
  • -93dB Signal to Noise Ratio
  • Fully Balanced Circuitry
  • Analogue Signal Path
  • Input/Output Buffering
  • 3x Stereo RCA Inputs
  • 4x Stereo XLR Inputs
  • 2x Stereo RCA Outputs
  • 1x Stereo XLR Output
  • Convection Cooled
  • 12v Trigger On/Off Input/Output
  • Solid Aluminium Chassis

 

SPECIFICATIONS

Frequency Range: 2.5Hz – 200kHz +/- 3dB

Total Harmonic Distortion: 0.002% 20Hz – 20kHz

Intermodulation Distortion: -100dB on all inputs

Signal to Noise Ratio: -93dB on all inputs

Channel Separation: 10Hz @ 90dB, 1kHz @ 90dB, 10kHz @ 90dB, 20kHz @ 85dB

Channel Balance: 0.01dB

Input Max Voltage: 10v RMS Balanced – 5v RMS Unbalanced

Output Max Voltage: 15v RMS Balanced – 5v RMS Unbalanced

Output Offset: 0mV (Both Channels)

Potentiometer Performance: 0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB (13seconds Full Travel)

Nominal Gain: Fixed at x 1.1

Input Impedance: 94 kΩ Balanced – 75 kΩ Unbalanced

Output Impedance: 100Ω (Short Circuit Protected)

Operating Voltage: 85v – 270v AC (50Hz – 60Hz) Auto Switching

Dimensions Without Integra Legs: 420mm (w) x 355mm (d) x 88mm (h)

Dimensions With Included Integra Legs: 480mm (w) x 355mm (d) x 128mm (h)

Weight: 10kG

Additional information

Weight 10 kg
Dimensions 35.5 × 48 × 12.8 cm
Brand

Chord

You may also like…