Description
IsoAcoustics GAIA III Speaker Isolators
The IsoAcoustics GAIA III Speaker Isolators have a small compact design that delivers unbelievable acoustic isolation that will bring out clarity and openness from your speaker like you’ve never heard.
The sound stage blossoms to open up a three-dimensional image of natural, spatial sound.
Designed for floor standing speakers and subwoofers weighing up to 70 lbs (32 KG), the GAIA III will provide more openness and clarity. Structural borne noise is greatly reduced while internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness.
View IsoAcoustic Products >>
How to install GAIA III isolators
Optimal results are achieved by installing the GAIA isolators with the logo facing the listening position, or rotated 180 degrees, to align the isolators with the speaker’s motive forces. The GAIA III provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Lift and place the speakers into position as the GAIA lower isolators will adhere to the supporting surface.
The GAIA’s are threaded into the base of the speaker or subwoofer to replace the existing spikes or feet. Threading the GAIA’s into the base of the speaker creates a strong connection with the speaker. With the top of the GAIA housing connected with the speaker and the bottom of the GAIA connected to the supporting surface, all of the energy is then managed by the GAIA’s internal isolator.
The GAIA III includes thread adaptors for sizes M6-1.0, M8-1.25 and ¼”-20. Alternative thread size adaptors are available upon request.
FAQ’s
What direction should the IsoAcoustics logo on the GAIA’s be facing?
Optimal results are achieved by installing the GAIA isolators with the logo facing forward, in line with the speaker’s drivers. Alternatively, they can be rotated 180 degrees to face the rear. The isolators are directional and are designed to be aligned with the speaker’s motive forces. The direction of the IsoAcoustics logo does not matter when used with turntables or audio components.
Which GAIA model will perform best for my speakers?
The GAIA model should be selected based on the weight that they are supporting. The weight limits we set are based on the performance curve. The GAIAs perform well up to the specified weight limits, but once you are within 10% of the weight limit, we recommend using the next size up for best results. We do not recommend exceeding the weight limits of the GAIA’s or GAIA-TITAN’s.
Can the GAIA be used on Carpet?
Yes. For thicker carpet, we recommend using the GAIA carpet discs for best results so that that the GAIA’s connect to a solid surface.
How can I move the position of my speakers after the GAIA Isolators have been installed?
On smooth floors like hardwood, we recommend sliding a cloth underneath the GAIA’s by tilting the speakers to each side. Once the speakers with GAIA’s are on top of the cloth, the speakers can slide along the floors into position.
On carpeted floors furniture sliders can be placed under each GAIA to help them slide into place on the carpet.
Can the GAIA series be used on stand mounted speakers?
If the speakers are fastened to the stands, then they tend to act as one and the GAIA series are recommended for installation on the floor stand.
If the speakers are resting on top of the stands, then we recommend isolation between the speaker and the stand. The OREA series are a great option in this case.
The weight of my speaker is slightly above the maximum weight. How will this affect the GAIA performance?
We do not recommend exceeding the specified weight limit. The weight limits are set based on the performance curve, not based on how much weight they can support. The performance of the GAIA is still strong at the weight limit but is quickly declining above this weight. If your speakers are within 10% of the weight limit, we recommend using a larger GAIA model for the best results.
Specifications
- Dimensions (W x H) 1.7” x 1.5” (43mm x 39mm)
- Maximum weight 70lbs (32kg) per set of 4
- Quantity 4 per box
- Thread sizes included* M6-1.0, M8-1.25 and ¼”-20 *Alternative thread sizes available on request.
