ProAc Response DT8 Floorstanding Speakers

$6,999.00 inc GST


ProAc invested a great deal of time researching the choice of diaphragm material for their drive units in the ProAc Response DT8 Floorstanding Speakers.

Some materials excel at certain frequencies and therefore it is logical to use more than one type of drive unit material to cover all frequencies.

*contact us for colour availability.

Advice from a specialist?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: ProAc_DT8 Categories: , , , GTIN: 4051154076621 Brand: GTIN / EAN / UPC: 4051154076621

Description

ProAc Response DT8 Floorstanding Speakers

The ProAc Response DT8 Floorstanding Speakers utilising 2 x 6.5-inch drivers, the pulp mica cone unit delivers exceptional bass performance in a ported cabinet with the bass loaded via side vents. The polypropylene unit gives a smooth, detailed and uncoloured midrange. Both drivers work in tandem, resulting in a well extended low frequency response and ProAc’s natural sounding midrange with pinpoint imagery.

These frequency ranges are then cleverly overlapped by a Stewart Tyler designed crossover, which seamlessly integrates ProAc’s proven 1-inch soft dome tweeter. The tweeter is mounted in an offset position between the two bass drivers.

The Response DT8 takes its place in the ProAc range as our entry level floor-standing design.

We believe that this innovative loudspeaker will create interest in the mixing and matching of drive unit materials to effectively cover all types of music.

 

Specifications

  • Nominal Impedance 4 ohms
  • Recommended Amplifiers 20 to 180 watts
  • Frequency Response 28Hz-30kHz
  • Sensitivity 90 dB linear for 1 watt at 1 metre
  • Bass /midrange drivers 2x 6.5” bass/mid units. One driver with Pagina Mica cone and open weave dust cap and one driver with polypropylene cone with soft polypropylene dust cap. Both units working in tandem.
  • Tweeter ProAc 1” silk dome tweeter
  • Crossover Specially designed crossover to accommodate two different types of bass/mid cones. Glass fibre board with finest components using multistrand copper wire designed for use with both Bi-amping and Bi-wiring.
  • Height (Cabinet) 978mm on spikes(38.5”)
  • Width (Cabinet) 193mm (7.6”)
  • Depth (Cabinet) 229mm (9”)
  • Weight 26kg each (55lb)
  • Model Stand mounting
  • Grille Acoustically transparent crimplene
  • Standard Finishes Black Ash, Mahogany, Cherry, Oak, Silk White and Walnut
  • Premium Finishes Rosewood, Ebony. *Premium Finishes to order at extra cost, please contact our team*

 

Additional information

Weight 26 kg
Dimensions 22.9 × 19.3 × 97.8 cm
Brand

ProAc

You may also like…