Description
WyreStorm EX-35-H2 35m 4K60 HDBaseT Extender
The WyreStorm EX-35-H2 35m 4K60 HDBaseT Extender has implemented their VLC chipset (Visually Lossless Compression) into this model meaning it’s ready for the next shift in content technology: 60Hz HDR and 4:4:4 60Hz.
View Specifications >> View WyreStorm >>
Features
- 4K UltraHD extender set capable of transmitting AV content over medium
distances using single cable Cat6 cable - Full UHD 4K transmission supporting HDMI 2.0 video standards
- Supports all high definition resolutions including 4K UHD @30hz 4:4:4 24bit | 4K HDR @24Hz 4:2:0 10bit (BT.2020) – see specifications for details
- Revised chipset increases compatibility with new 4K UHD source devices
- Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable
- Low profile chassis of 15mm for easier, more convenient installations behind screens at display zones
- Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos
- Switchable RS-232 function mode on transmitter and receiver for firmware update
- Threaded bushings allow use of both standard and locking DC power plugs
- Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal
- Cable termination follows IEEE-568B standards
- Automatically adjusts feedback, equalization and amplification of signal for easy installation
- Energy efficient universal power supply included
HDCP 2.2 COMPLIANT
The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-35-H2 supports the multi-point distribution of this content over HDBaseT.
SIGNAL RE-CLOCKING
Installers shouldn’t experience problems because of source equipment they have no control over. That’s why all extenders in the WyreStorm H2 family automatically “re-clock” the source signal, overcoming clock-stretching issues found in certain source devices.
FLEXIBLE INSTALLS WITH 2-WAY POH
No 2 installs are the same; that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.
In the Box
- 1x EX-35-H2 Transmitter
- 1x EX-35-H2 Receiver
- 1x 18V DC 1A Power Supply (US/UK/EU)
- 2x 3-pin Screw Down Phoenix Connectors
- 1x IR Emitter
- 1x IR Receiver
- 4x Mounting Brackets (2x for TX | 2x for RX)
- 1x Quickstart Guide
Specifications
AUDIO & VIDEO
Inputs
TRANSMITTER 1x HDMI: 19-pin type A
RECEIVER 1x HDBaseT: 8-pin RJ-45 Female
Outputs
TRANSMITTER 1x HDBT: 8-pin RJ-45 Female
RECEIVER 1x HDMI: 19-pin type A
Output Video Encoding HDBaseT™ Class A
Encoding Data Rate 18Gbps
End to End Latency 10μs (microseconds)
Audio Formats 2ch Analog/PCM | Multichannel: LPCM
Video Resolutions (max)
- 1920x1080p @60Hz 16bit
- 3840x2160p @60Hz 10bit 4:2:0 HDR
- 4096x2160p @60Hz 8bit 4:4:4
Supported Standards DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock HDMI: 600MHz | HDBaseT: 297MHz
COMMUNICATION & CONTROL
HDMI HDMI 2.0 | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)
HDBaseT HDMI 2.0 | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR and RS-232
IR
- 1x IR TX 3.5mm (1/8in) Mono | Bidirectional over HDBaseT
- 1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT
RS-232 1x 3-pin Screw Down Phoenix Connector | Bidirectional over HDBaseT
POWER
Power Supply 18V DC 1A
PoH 48V 15.4W
Max Power Consumption 8.88W
