Description
WyreStorm EX-70-H2 70m 4K60 HDBaseT Extender
The WyreStorm EX-70-H2 70m 4K60 HDBaseT Extender has their VLC chipset (Visually Lossless Compression) meaning it’s ready for the next shift in content technology: 4K 60Hz 4:4:4 HDR.
View Specifications >> View WyreStorm >>
Features
- HDBaseT™ Class B transmission of 4K HDR up to 70m/230ft and 1080p @60Hz 36bit up to 100m/328ft
- Full UHD 4K transmission supporting HDMI 2.0 video standards
- Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable
- Low profile chassis of 15mm for easier, more convenient installations behind screens at display zones
- Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos
- Switchable RS-232 function mode on transmitter and receiver for firmware update
- Threaded bushings allow use of both standard and locking DC power plugs
- Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal
- Cable termination follows IEEE-568B standards
- Automatically adjusts feedback, equalization and amplification of signal for easy installation
- Energy efficient universal power supply included
HDCP 2.2 COMPLIANT
The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-70-H2 supports the multi-point distribution of this content over HDBaseT.
SIGNAL RE-CLOCKING
Installers shouldn’t experience problems because of source equipment they have no control over. That’s why all extenders in the WyreStorm H2 family automatically “re-clock” the source signal, overcoming clock-stretching issues found in certain source devices.
FLEXIBLE INSTALLS WITH 2-WAY POH
No 2 installs are the same; that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.
In the Box
- 1x EX-70-H2 v2 Transmitter
- 1x EX-70-H2 v2 Receiver
- 1x IR Emitter
- 1x IR Receiver
- 2x 3-pin Terminal Block
- 1x 18V DC 1A Power Supply (US/UK/EU)
- 4x Mounting Brackets (2x for TX | 2x for RX)
- 1x Quickstart Guide
Specifications
Inputs
TRANSMITTER 1x HDMI: 19-pin type A
RECEIVER 1x HDBaseT 8-pin RJ-45 female
Outputs
- 1x HDBT: 8-pin RJ-45 Female
- 1x HDMI: 19-pin type A
Output Video Encoding HDBaseT™ Class A
Encoding Data Rate 9.2Gbps
End to End Latency 10μs (microseconds)
Audio Formats 2ch PCM | Multichannel up to DTS-X and Dolby Atmos
Video Resolutions (max)
- 1920x1080p @60Hz 16bit
- 3840x2160p @60Hz 10bit 4:2:0 HDR
- 4096x2160p @60Hz 8bit 4:4:4
Supported Standards DCI | RGB | Dolby Vision @ 30Hz | HLG | HDR-10
Maximum Pixel Clock HDMI: 600MHz | HDBaseT: 297MHz
COMMUNICATION & CONTROL
HDMI HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, and RS-232
CEC CEC Pass-through – Requires CEC compatibility between source and display
IR
- 1x IR TX: 3.5mm (1/8in) TS Mono
- 1x IR RX: 3.5mm (1/8in) TRS Stereo
RS-232 1x RS-232: 3-pin Terminal Block
POWER
Power Supply 18V DC 1A
PoH IEEE 802.3af 48V 15.4W Max | 2-way
Max Power Consumption 4.68W
