Description
WyreStorm EXP-SP-0102-8K-H2 8K60 1:2 HDMI Splitter
The WyreStorm EXP-SP-0102-8K-H2 8K60 1:2 HDMI Splitter’s most useful feature of this splitter is that the second output can scale content down from either 8K>4K or 4K>1080p!
Furthermore, its compatible with DSC (Display Stream Compression) version 1.2a pass-through, an approved method of compression in accordance to the HDMI 2.1 specification, allowing up to a lossless 10K@120Hz signal to be transmitted.
Don’t forget to pair this splitter with some passive or active HDMI 2.1 cables!
View Specifications >> View other WyreStorm Products >>
Features
- HDCP 2.3 compliant
- S/PDIF audio output from HDMI de-embed
- Supports up to 40Gbps FRL and 18Gbps TMDS
- FRL to TMDS and TMDS to FRL mode conversion
- Supports HDMI2.1 features such as QFT (Quick Frame Transport), QMS (Quick Media Switching), ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate)
- Small compact size for discrete installations
- No single use plastic included*
TAILORED FOR RETAIL
Split captivating 8K source content between two 8K displays in the retail environment to showcase the powerful capabilities of the emerging resolution in consumer TV’s on the show floor.
SCALING SOLUTIONS
As early adopters of 4K and 8K signal distribution, WyreStorm know that retrofitting is important in the dawn of new resolution standards. With this splitter, you can rest assured that you won’t be forced to upgrade all displays or AVRs to 8K to reap its benefits. Just set the splitter to downscale to 4K and enjoy 8K content while supporting 4K at the same time!
EDID MANAGEMENT
Display compatibility is the last thing you need to worry about. This splitter gives you 5 EDIDs that can be adjusted via dipswitches. The splitter also supports Smart EDID, which will auto-negotiate EDIDs based on the detected displays and adjust accordingly.
8K AND BEYOND
The WyreStorm EXP-SP-0102-8K-H2 8K60 1:2 HDMI Splitter not only meets 8K demands but they’re empowered with DSC passthrough, an approved method found in the HDMI 2.1 specification to transmit super-high bandwidth content (up to 10K@120Hz!) producing mathematically lossless content.
COMPLETE YOUR SETUP
WyreStorm offers HDMI 2.1 cables in a number of different lengths and flavors. Use our passive 2.1 cables for short distances up to 3m (9ft). If you need to go a long distance take advantage of our Active Optical 2.1 cables that can reach 15m (50ft).
In the Box
- 1x EXP-SP-0102-8K
- 1x DC 12V PSU (UK/US/EU/AU)
- 2x Mounting Brackets (with screws)
Specifications
TRANSMISSION
Transmission Encoding Uncompressed (with DSC 1.2a Pass-through between Source-Display when required)
End to End Latency Zero
Maximum Transmission Bit Rate 40Gbps (4-core, 10Gbps per lane)
VIDEO
HDMI TMDS (600MHz Maximum) | FRL (16b/18b encoding) | DSC 1.2a Supported
Input 1x HDMI: 19-pin type A Male
Output 2x HDMI: 19-pin type A Male
Maximum Data Rate 40 Gbps (FRL) | 18 Gbps (TMDS)
Video Resolution (Max)
- 1920 x 1080p @240Hz
- 4096 x 2160p @120Hz 4:4:4 10bit
- 5120 x 2880p @60Hz 4:4:4 10bit
- 7680 x 4320p @60Hz 4:2:0 10bit
- 10240x4320p @120Hz w/DSC
Supported Standards DCI | HDR10+ | Dolby Vision | HLG | SL-HDR1 | PQ | BT.2020 | BT.2100
AUDIO
Audio Return Channel (ARC) Supported
Audio Formats 2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos
Maximum Sampling Rate 192KHz
Maximum Audio Channels 32
COMMUNICATION & CONTROL
HDMI HDMI 2.1 | HDCP 2.3 | EDID | CEC (Pass-through) | VRR (Variable Refresh Rate) | ALLM (Auto Low Latency Mode) | FVA (Fast Vactive)
POWER
Power Consumption 12V DC 1A
Max Power Consumption 3.5W
ENVIRONMENTAL
Maximum BTU 12BTU/hr
ESD Protection Human-body Model: ±8kV (Air-gap discharge) / ±4kV (Contact discharge)
